| MICRO FIRELITE HEATERS |
 |
Kendrick's new Micro FireLite heaters are designed for use with our new MICRO FireLite Controller. They have the special connector that allows them to connect to the FireLite controller (shown in the image to the right). It is important to note that any anti-dew heater with a RCA connector (this includes our Premier and FireFly heaters) will not connect with this controller.
IMPORTANT! The maximum amperage capacity of this controller is 1.5 amps. What does this mean? Basically it means that you will have to choose your heaters carefully, otherwise you will end up blowing fuses. All the heaters offered in the FireLite line are 1.5 amps or less. If you want to use two heaters with the FireLite controller, you will have to make sure that the total amperage of the two heaters does not exceed 1.5 amps. The amperage of the heaters is shown in the chart below.
Like all our other heaters, the FireFly heaters will direct their heat into your optics instead of losing it into the atmosphere. We use the same construction methods and materials as our Premier and FireFly heaters. These heaters are very effective in directing most of the heat into the optics which is important if dew is to be prevented.
So where do these heaters and the MICRO FireLite controller excel? See the partial list below:
- Anyone who wants to travel light with a small telescope.
- Anyone who uses a DSLR camera for astrophotography.
- Anyone who wants an inexpensive dew control system.
- Anyone who wants a compact lightweight solution for smallish optics where weight and balance are of importance (ie: Dobsonain secondary mirrors, finders, etc).
| Item No. | Heater | Wattage | Amperage |
| 2003-FL | Telrad Heater with Micro connector. Comes with 12" (30 cm) lead wire. | 2 | 0.2 |
| 2004-FL | .965" Eyepiece Heater with Micro connector. Comes with 12" (30 cm) lead wire. | 2 | 0.2 |
| 2005-FL | 1.25" Eyepiece Heater with Micro connector. Comes with 12" (30 cm) lead wire. | 3 | 0.2 |
| 2006-FL | 2" Eyepiece Heater with Micro connector. Comes with 12" (30 cm) lead wire. | 4 | 0.3 |
| 2007-FL | 3" Optic Heater with Micro connector. Comes with 18" (46 cm) lead wire. | 6 | 0.5 |
| 2008-FL | 4" Optic Heater with Micro connector. Comes with 18" (46 cm) lead wire. | 7 | 0.6 |
| 2009-FL | 5" Optic Heater with Micro connector. Comes with 18" (46 cm) lead wire. | 8 | 0.6 |
| 2010-FL | 6" Optic Heater with Micro connector. Comes with 36" (92 cm) lead wire. | 9 | 0.7 |
| 2011-FL | 7/8" Optic Heater with Micro connector. Comes with 36" (92 cm) lead wire. | 14 | 1.1 |
| 2012-FL | 9/10" Optic Heater with Micro connector. Comes with 36" (92 cm) lead wire. | 17 | 1.3 |
| 2013-FL | 11" Optic Heater with Micro connector. Comes with 36" (92 cm) lead wire. | 18 | 1.4 |
| 2005-B1-FL | Bino-viewer Heaters for eyepieces up to 1.5 inch barrel diameter. With Micro connector. | 6 | 0.5 |
| 2005-B2-FL | Bino-viewer Heaters for eyepieces over 1.5 inch barrel diameter. With Micro connector. | 8 | 0.6 |
These heaters come with standard wire lengths of 12", 18" or 36", as indicated above. If you require a different length wire, you must contact Kendrick. Our maximum length lead wire is 36" (92 cm) and we only have the three lengths.
One year limited warranty. Warranty covers defects in workmanship and materials. Normal wear and tear are not covered. Tampering, misuse and abuse voids the warranty. See our return policy for a full explanation of our warranties and return policies.
Item No. | Description | Price CAN | Click to add item to cart |
| Kendrick MICRO FireLite Heaters |
| FITTING DIMENSIONS |
 |
The table below will help you to determine which heater is the right one for you scope.