Prices are Canadian (CAN) dollars. For non-Canadian orders, the exchange rate will be determined by your credit card company or financial institution when your order is processed. Currency Converter
 

KENDRICK DIGI-KLEAR PAD HEATER

 DIGI-KLEAR PAD HEATERS  
 Digi-Klear Heater with eyepieces and filter.  Digi-Klear Heater with iPad.  Digi-Klear Heater's LED Display.

Originally designed by Kendrick for use in the dental market to keep intra-orral dental mirrors free of fog and mist, this heater is excellent for use in an observatory (if you have access to 120 VAC) where you need to keep eyepieces, filters, tablets, iPads or any other devices warm and moisture free.

It is temperature programable within a certain range (from 27 C to 51 C) (81 F to 124 F).

It has built in temperature safety cut-off control with automatic temperature regulation.

It has been UL approved.

SPECIFICATIONS

  • Voltage: 120 VAC
  • Dimensions: 264 mm x 184 mm x 20 mm, 10.5" x 7.25" x .75"
  • Weight: 355 grams, 12.5 oz
  • Programable temperature (range from 27 C to 51 C / 81 F to 124 F)
  • Built in safety temperature cut-off control.
  • Celsius or Fahrenheit operation.
  • LED temperature display.
  • One year warranty

    Item
    No.    		DescriptionPrice
    CAN    		Click to add
    item to cart
    Kendrick Digi-Klear Heater

     

    KENDRICK LAPTOP COMPUTER HEATER

    •  LAPTOP COMPUTER HEATERS  
    The Kendrick Laptop Computer Heater. The laptop computer is placed on top of the heater. Place laptop in a box as shown to create a small heated environment.

    This heater is excellent for keeping your laptop computer free of moisture and functioning properly in wet, humid or cold environments where dew, frost or cold may cause serious damage to your computer or slow its performance due to cold temperatures.

    We recommend placing the heater inside a box placed on it's side and then placing the computer on top of the heater. This will create an enclosed environment that will create a pocket of air around your computer that is warmer than the ambient temperature.

    These heaters also make excellent eyepiece heating pads. When not in use, simply put your eyepieces on the heater, optic side down and it will keep your eyepieces dew free.

    Item
    No.    		DescriptionPrice
    CAN    		Click to add
    item to cart
    Kendrick Laptop Heater

     HOW TO USE THE SYSTEM  
    We recommend that you put your heaters in place at the beginning of an observing session and turn your controller on right away. If you are using Premier Heaters, or heaters for Newtonian or RC Telescopes, we recommend a controller setting that represents about 20 to 40% If you are using FireFly or MICRO FireLite Heaters, we recommend a setting of about 60 to 80%.

    If moisture has already condensed on your optics, we recommend covering the optics, turning the heaters on high and waiting 20 to 30 minutes. Once the moisture has cleared, lower your controller setting and resume observing.

     POWER REQUIREMENTS  
    With the exception of our #2021-A Pad Heater, our dew control systems require 12 volts DC. If you are using a battery to run the system, we recommend a 5 amp hour battery as a minimum. If you want to run the system from a wall plug, you will need a step down converter with a minimum output of 5 amps. For information on the power systems we offer for our systems, please click here.

     

    Item
    No.    		DescriptionPrice
    CAN    		Click to add
    item to cart
    120 Volt Converter

     


    Privacy Statement: All information submitted to Kendrick Astro Instruments will be treated with the utmost confidentiality and privacy. We do not share any information with any outside parties whatsoever.
    36 Cawthra Ave., Toronto, Ont M6N 5B3
    Phone 416 762 7946 Fax 416 762 2765